Production of cast aluminium plates

Low-stress, precision-cut pieces from a single casting: cast aluminium blocks and plates made from the EN AW-5083 alloy (Al Mg 4.5 Mn)

Our aluminium cast plates made from the EN AW-5083 alloy (Al Mg 4.5 Mn) are characterised in particular by their low residual stress. AMCO produces these cast plates in various thicknesses and dimensions using state-of-the-art equipment. Homogenisation of the cast ingots ensures an excellent microstructure. Aluminium castings offer virtually unlimited applications, thanks to their excellent machinability and high corrosion resistance. The product is therefore particularly suitable for components requiring complex machining in tool, mould and model making. Our cast plates are characterised by the following properties:

  • Very good strength values
  • Low residual stress
  • Excellent flatness guaranteed after sawing
  • Excellent corrosion resistance
  • Good technical anodising properties
  • Good weldability
  • Good mechanical properties
  • Very good machinability

Our manufacturing process: ensuring outstanding material properties for a truly remarkable material

The raw material must be just right. Only then can we deliver perfect quality. That is why we select our suppliers according to the strictest criteria and scrutinise the raw ingots supplied for hydrogen content and water inclusions. Furthermore, AMCO attaches the utmost importance to ensuring that all partners work with certified heat treatment facilities. Through these ‘rigourous tests’ for suppliers and materials, we ensure that all supplied aluminium ingots are characterised by an excellent microstructure, low residual stress, very good strength and machinability. Only in this way are they perfectly suited for cutting to your required dimensions and for your specific applications.

We manufacture using the following block sizes:

Length (mm)Width (mm)Height (mm)
57015703050
57015703670
57021703050
105017202250

Mechanical Properties

PropertyDesignationRangeUnit
Tensile strengthRm230 – 275MPa (N/mm²)
Yield strengthRp 0.2115 – 125MPa (N/mm²)
Elongation at breakA1010 – 15%
Brinell hardnessHB68 – 75HB

Additional Features

CategoryPropertyValue / Specification
Face milledSurface roughnessRa = 0.4 / Rz = 2
Face milledThickness tolerance± 0.1 mm
Flatness deviationMax. thickness < 16 mm0.40 mm/m
Flatness deviationThickness > 16 mm0.15 mm/m
Saw cutThickness tolerance-0 / +3 mm

Questions about aluminum cast plate production?

Our team would be delighted to assist you. We look forward to hearing from you and supporting you with any questions or requirements.
 

+49 421 41009-0